• 首页
  • vue
  • TypeScript
  • JavaScript
  • scss
  • css3
  • html5
  • php
  • MySQL
  • redis
  • jQuery
  • ftp_get()

    (PHP 4, PHP 5, PHP 7)

    从 FTP 服务器上下载一个文件

    说明

    ftp_get(resource $ftp_stream,string $local_file,string $remote_file,int $mode[,int $resumepos= 0]): bool

    ftp_get()函数用来下载 FTP 服务器上指定的文件并保存为本地文件。

    参数

    $ftp_stream

    FTP 连接的链接标识符。

    $local_file

    文件本地的路径(如果文件已经存在,则会被覆盖)。

    $remote_file

    文件的远程路径。

    $mode

    传送模式。只能为(文本模式)FTP_ASCII或(二进制模式)FTP_BINARY中的其中一个。

    $resumepos

    从远程文件的这个位置继续下载。

    返回值

    成功时返回TRUE,或者在失败时返回FALSE

    范例

    ftp_get()例子

    <?php
    // define some variables
    $local_file = 'local.zip';
    $server_file = 'server.zip';
    // set up basic connection
    $conn_id = ftp_connect($ftp_server);
    // login with username and password
    $login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
    // try to download $server_file and save to $local_file
    if (ftp_get($conn_id, $local_file, $server_file, FTP_BINARY)) {
        echo "Successfully written to $local_file\n";
    } else {
        echo "There was a problem\n";
    }
    // close the connection
    ftp_close($conn_id);
    ?>
    

    更新日志

    版本说明
    4.3.0增加了$resumepos

    参见

    • ftp_pasv()返回当前 FTP 被动模式是否打开
    • ftp_fget()从 FTP 服务器上下载一个文件并保存到本地一个已经打开的文件中
    • ftp_nb_get()从 FTP 服务器上获取文件并写入本地文件(non-blocking)
    • ftp_nb_fget()从 FTP 服务器获取文件并写入到一个打开的文件(非阻塞)
    I tried to ftp a 7mb file today off my webserver.
    I copied this example directly and it told me.
    Port command successful
    "there was a problem"
    I thought it was because of the size.
    But I guessed it might be cause of my firewall.
    So I made the ftp connection passive:
    <?PHP
     
     ...
     $login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
     ftp_pasv($conn_id, true);
    ?>
    Ran the script again & it worked fine.
    Hope this helps someone
    Don't want to use an intermediate file? Use 'php://output' as the filename and then capture the output using output buffering.
    ob_start();
    $result = ftp_get($ftp, "php://output", $file, FTP_BINARY);
    $data = ob_get_contents();
    ob_end_clean();
    Don't forget to check $result to make sure there wasn't an error. After that, manipulate the $data variable however you want.
    Why there isn't an "ftp_get_contents" function, I don't know. It takes a little work to emulate one, but it's doable.
    <?php
    function ftp_get_contents($ftp_stream, $remote_file, $mode, $resume_pos=null){
      $pipes=stream_socket_pair(STREAM_PF_UNIX, STREAM_SOCK_STREAM, STREAM_IPPROTO_IP);
      if($pipes===false) return false;
      if(!stream_set_blocking($pipes[1], 0)){
        fclose($pipes[0]); fclose($pipes[1]);
        return false;
      }
      $fail=false;
      $data='';
      if(is_null($resume_pos)){
        $ret=ftp_nb_fget($ftp_stream, $pipes[0], $remote_file, $mode);
      } else {
        $ret=ftp_nb_fget($ftp_stream, $pipes[0], $remote_file, $mode, $resume_pos);
      }
      while($ret==FTP_MOREDATA){
        while(!$fail && !feof($pipes[1])){
          $r=fread($pipes[1], 8192);
          if($r==='') break;
          if($r===false){ $fail=true; break; }
          $data.=$r;
        }
        $ret=ftp_nb_continue($ftp_stream);
      }
      while(!$fail && !feof($pipes[1])){
        $r=fread($pipes[1], 8192);
        if($r==='') break;
        if($r===false){ $fail=true; break; }
        $data.=$r;
      }
      fclose($pipes[0]); fclose($pipes[1]);
      if($fail || $ret!=FTP_FINISHED) return false;
      return $data;
    }
    ?>
    Something similar would work to write a ftp_put_contents function, too.
    Keep in mind that ftp_get will overwrite the file on your local machine if it has the same name.
    ftp_sync is a way to walk the directory structure on the server and copy every directory and file to the same location locally.
    <?php
    $ftp_server = "ftp.example.com";
    $conn_id = ftp_connect ($ftp_server)
      or die("Couldn't connect to $ftp_server"); 
      
    $login_result = ftp_login($conn_id, "user", "pass");
    if ((!$conn_id) || (!$login_result))
      die("FTP Connection Failed");
    ftp_sync ("DirectoryToCopy");  // Use "." if you are in the current directory
    ftp_close($conn_id); 
    // ftp_sync - Copy directory and file structure
    function ftp_sync ($dir) {
      global $conn_id;
      if ($dir != ".") {
        if (ftp_chdir($conn_id, $dir) == false) {
          echo ("Change Dir Failed: $dir<BR>\r\n");
          return;
        }
        if (!(is_dir($dir)))
          mkdir($dir);
        chdir ($dir);
      }
      $contents = ftp_nlist($conn_id, ".");
      foreach ($contents as $file) {
      
        if ($file == '.' || $file == '..')
          continue;
        
        if (@ftp_chdir($conn_id, $file)) {
          ftp_chdir ($conn_id, "..");
          ftp_sync ($file);
        }
        else
          ftp_get($conn_id, $file, $file, FTP_BINARY);
      }
        
      ftp_chdir ($conn_id, "..");
      chdir ("..");
    }
    ?>
    
    Here's a quick function that figures out the correct mode to use based on a file's extension.
    <?php
    function get_ftp_mode($file)
    {  
      $path_parts = pathinfo($file);
      
      if (!isset($path_parts['extension'])) return FTP_BINARY;
      switch (strtolower($path_parts['extension'])) {
        case 'am':case 'asp':case 'bat':case 'c':case 'cfm':case 'cgi':case 'conf':
        case 'cpp':case 'css':case 'dhtml':case 'diz':case 'h':case 'hpp':case 'htm':
        case 'html':case 'in':case 'inc':case 'js':case 'm4':case 'mak':case 'nfs':
        case 'nsi':case 'pas':case 'patch':case 'php':case 'php3':case 'php4':case 'php5':
        case 'phtml':case 'pl':case 'po':case 'py':case 'qmail':case 'sh':case 'shtml':
        case 'sql':case 'tcl':case 'tpl':case 'txt':case 'vbs':case 'xml':case 'xrc':
          return FTP_ASCII;
      }
      return FTP_BINARY;
    }
    // sample usage
    ftp_get($conn_id, $local_file, $server_file, get_ftp_mode($server_file));
    ?>
    
    Crud. The _nb_ only refers to reading from the ftp server, and the buffer in the socket pair is only about 364 bytes. So it doesn't work for files larger than that size.
    If you ran the example and see that it fail after 90sec (timeout).
    Then try adding:
    <?php
    ftp_pasv($ftp_conn, true);
    ?>
    
    <?php
            // define some variables
        $folder_path = "YOUR FOLDER PATH"; 
        $local_file = "LOCAL FILE PATH";
        $server_file = "SERVER FILE PATH";
        
        //-- Connection Settings
        $ftp_server = "IP ADDRESS"; // Address of FTP server.
        $ftp_user_name = "USERNAME"; // Username
        $ftp_user_pass = "PASSWORD"; // Password
        #$destination_file = "FILEPATH"; 
        
        // set up basic connection
        $conn_id = ftp_connect($ftp_server);
        
        // login with username and password
        $login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
        
        // try to download $server_file and save to $local_file
        if (ftp_get($conn_id, $local_file, $server_file, FTP_BINARY)) {
          echo "Successfully written to $local_file\n";
        } else {
          echo "There was a problem\n";
        }
        
        // close the connection
        ftp_close($conn_id);
    ?>
    
    Note that PHP still defaults to FTP active mode by default, which is almost never used anymore since the creation of firewalls.  Don't forget to add a ftp_pasv($conn, true) after your ftp_login.
    Hello everybody,
    If someone will try to download files to the same local file (some temporary file), like shown here:
    <?php
    foreach ($files as $key=>$path) {
    ... 
     $result = ftp_get($ftpConnId, 'temp.tmp', $path, FTP_BINARY);
    ...
    }
    ?>
    please take in consideration the fact that you will have big problems with downloading (getting) hole files. In other words ‘temp.tmp’ file always will have the same size equal to first downloaded file despite the real size of downloading file. I have not idea what is the reason!
    If someone will think that problem is just in getting proper file size (which you will get using filssize() function) he will be mistaken. The download file’s size is not equal to source file’s size materially, that means fflush() function will not solve the problem (I have tried this as well).
    Finally the solution was founded: before downloading a file you will need to delete local file if such exist (‘temp.tmp’). So working code will look like:
    <?php
    foreach ($files as $key=>$path) {
    ... 
     if (file_exists('temp.tmp')) {
      unlink('temp.tmp');
     }
     $result = ftp_get($ftpConnId, 'temp.tmp', $path, FTP_BINARY);
    ...
    }
    ?>
    Good luck in scripting :-)
    Vitali Simsive
    The zero size file is not a side effect. When the ftp_get starts the first thing it does is to create the inode/file which it will stream the data too and that is a zero size file with the nname you specified for the local file. When the download fails it leaves the file in place.
    I am using ftp_get function to download a file from the FTP server to my web server where my php script is running.
    On the webserver, I want the file to be downloaded to a directory which has a structure as follows -> Data/Files/localfilename.exe
    However, when I specify the above string in the $local_file_name parameter of ftp_get I get an error saying the file does not exist.
    I am running a Windows Server and the php script is running from C:/xampp/htdocs/file.php
    Is there any way where I can specify the path on the web server where the file is supposed to be downloaded ?
    If you previously downloaded a file before (like a huge web log), and just want to get the remaining portion, do this:
    $local_file_size = filesize($local_file_path);
    $get_result = ftp_get($conn_id, $local_file_path, $remote_file_path, FTP_BINARY, $local_file_size);
    This same code works regardless of wether the local file exists already or not. You should first test to make sure the local file is not bigger than the remote file.
    I'd suggest use ftp_fget() instead of ftp_get() since the latter only return TRUE or FALSE and there's no obvious way to get the cause of failure.
      Using ftp_fget, you have to pass a file handle as local file, so you have to do fopen() first. By way of this, you can find 'Permission Denied' problem when call fopen(). If you use ftp_get(), there's no way to find this error cause.
      In my case, I run httpd using 'nobody' and I create ftp local folder using 'haha'. It tooks me long time to find the 'Permission Denied' problem at that time since I use ftp_get() then.
    On Windows (and possibly *NIX) you will get "[function.ftp-get]: failed to open stream: No such file or directory in..." errors if the local_file path contains directory paths that do not already exist.
    Even with write permissions ftp_get can create the file but it will NOT automatically create the parent directories as you might expect.
    A subtle issue with the ftp_get() function. The second param, string $local_file, is a file name on the SERVER running the php script. It is NOT a file on the client machine running the browser. I erroneously tried to use this ftp to download a file from my site to my local system. I entered the full path starting with the drive letter ("h:/...") on a system running WIN XP and kept getting a failure of unable to open (destination) file. Only after just putting in a file name with no pathing did I see where the file was written. It was in the directory on my site where the php script is located (hosting is managed shared LAMP server which supports multiple url's, GoDaddy hosting).
    Remember to use the full server paths to the directories you are working on. Server paths are not the same as "ftp paths".
    I was using the path displayed on my FTP client to download and upload files and I kept getting "Not found" or "Permission Denied" errors.

    上篇:ftp_get_option()

    下篇:ftp_login()